ARC METADDITIVE Rub-On Speed Finish

RUB-ON SPEED FINISH

They are blends of solid waxes with Metadditive^® and hydrophobic additives to achieve the highest acceleration and speed on natural and mixed artificial snow. They are used based on the snow type and temperatures indicated on the labels and can be reapplied between manches to ensure maximum performance. They are applied by rubbing them onto the base, covering it with a thin layer of product.

The recommended application (from tip to tail) is as follows:

1. Rub the block onto the base, covering it with a layer of product.
2. Immediately pass a polyester or merino wool roller at moderate speed (about 1000 rpm) applying light pressure to evenly distribute the product over the entire surface without heating (the base becomes shiny).
3. Brush the base first with the black horsehair manual or roto brush, then with the fine blue nylon manual or roto brush.
4. For maximum acceleration polish the base with the black polyamide roller.

SF FINE         -6°/-12°C.

Rub-on accelerator with Metadditive^® for fine natural snow with conserved and abrasive crystals, mixed with artificial snow.

SF VARIO      -4°/-9°C.

Rub-on accelerator with Metadditive^® for new and in-transformation natural snow, compact and abrasive, mixed with artificial snow.

SF MOIST      -2°/-6°C.

Rub-on accelerator with Metadditive^® and a special hydrophobic additive for new moist snow, icy, sticky and polish, mixed with artificial snow.

SF WET          -0°/-3°C.

Rub-on accelerator with Metadditive^® and a special hydrophobic additive for wet snow, rain and granita, mixed with artificial snow.