START TOP COATS/FINISHERS

Start Black Magic Green Finishing Gliders

Start 4570 Black Magic Green Finishing Liquid – 30 ml
• Specially developed for Artifical & Old snow
• Continues to perform even when mixed with some new snow
• Temperature range: -2…-25°C
• Peak performance in artificial snow temperature around -20°C and even colder.

• Also good in snow and colder than -15°C

• Shake bottle well! Apply the product
• 1^st layer -> Hand cork (no brushing)
• Apply the product
• 2ⁿᵈ layer -> iron 200°C Fast strokes
• Let completly cool,
• Good brushing -> Steel -> Natural -> Nylon

Start 4575 Black Magic Green ULTRA Glider Block 45g

• Race glide for cold conditions, to be used as top coat
• For old and mixed snow
• Temperature range: -8…-25°C; on dry/crystal snow it also works in milder conditions  

• Has its peak performance in old snow in temperatures colder than-10°C

 Melt with iron 160°C

• Cork with Roto cork
• Scrape
• Bush -> Steel -> Natural -> Nylon
• To get the best performance let completely cool and brush again -> Natural -> Nylon

Start 4577 Finishing liquid top 30ML

• Specially developed for New Snow
• Continues to perform even when mixed with some old snow
• Temperature range: -7…-20°C                                                                   

• Performance in new snow, the colder and drier the snow, the better. Sharp, abrasive snow crystals are ideal.

• Shake bottle well! Apply as thin as possible layer of the product.
• Hand cork
• Brush -> Natural -> Nylon

This powders/finishers are not melting at all. So NO IRONING at all!!!! ( melting point somewhere 2200-2400 C)

The amount is 30 ml as can or liquid bottle.

Start RG Ultra Powders:

At least 15…20 pairs with one can.

And with this product less is more!!!

The thinner film you can create that better is!

The powder is very fine stuff and you need very little of that.

1 .Apply small amount of powder onto the ski base.

2Spread evenly very thin with cloth or hand for all gliding area

3.Rub with natural hand cork with gentle hand to fasten powder onto the wax in the base

4.Brush well with natural hair brush to get off extra 

5.Polish well with stiff nylon brush